Command Line is not visible

I just updated Rhino 5 and can longer find the command line (picture below). How I get it back?

Thanks

Views: 453

▶ Reply to This

Replies to This Discussion

Permalink Reply by Benjamin Golder on May 9, 2012 at 3:11am

It seems that I can still type commands but the command line is nowhere to be found.

Permalink Reply by Barry Mair on May 9, 2012 at 3:17am

Hi Benjamin.

Did you try "commandprompt" then "yes" to display.

 

Actually "DisplayCommandPrompt" will turn it on.

Permalink Reply by Benjamin Golder on May 9, 2012 at 3:34am

Thanks, that worked, though it's awkward to have to use the command prompt in order to show the command prompt. Is there a menu item somewhere that will cause it to display?

Permalink Reply by Benjamin Golder on May 9, 2012 at 3:36am

Options > Appearance apparently works too.

Permalink Reply by Barry Mair on May 9, 2012 at 3:38am

I have only been there to maximise every pixel of realestate.

The options / appearance will be remembered.

Cheers.

 

Permalink Reply by Brian James on May 9, 2012 at 8:07am

The command 'ToolbarReset' should bring it back as well as the Main/Standard toolbar groups. A restart of Rhino will be required. 

Thanks,

Brian J. 

McNeel & Associates

RSS

Translate

© 2013   Created by McNeel Admin.

Badges  |  Report an Issue  |  Terms of Service