Printing Problem

Hi!

we found 2 problems when we want to print a model that includes curves and surfaces.

The first problen is that some curves was printed with a bigger size (rhino4 dind't do it)
The second problem occurs when we import a layout from another file, because we need to close and open file again, if not we can't go back to another view and continue working normally

that's all

thanks for your attention

Views: 126

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Brian James on July 25, 2012 at 7:12am

Hi Jose,

I'm wondering if you have a special pixel thickness set for curves and are in that display mode in the layout detail. v4 may not have that same display mode and so is not using the custom setting. You can send in the 3dm file to Tech@McNeel.com with a description of what you think is a bug and we'll take a look. I don't understand the second report here, can you provide a file that shows the problem and give us the steps you take?

Thanks,

Brian J. 

Robert McNeel & Associates

Permalink Reply by Mary Ann Fugier on September 6, 2012 at 10:45am

Hola Jose,

Thanks alerting us to these issues.

Problem 1: can you upload this portion of the model to us. We only need this logo and layout in the file that will exhibit this issue. Setting PrintWidths to layers and objects is also support in Rhino 4, so I do not know why just Rhino 5 is printing them.

Problem 2: I am unable to duplicate this with my models. It can be a bit slow, like 30 seconds to import a layout from another file, but it does it and I can continue to work on model. Please send a file that has a layout that will "paralyze" my current file if I import it.

 

You can attached the file to the thread or email mary@mcneel.com .

We appreciate your help.

Sincerely,

Mary Fugier
Robert McNeel & Associates
Seattle, WA

 

RSS

Translate

© 2013   Created by McNeel Admin.

Badges  |  Report an Issue  |  Terms of Service