SR Canditate does not export texts to dwg/dxf

Hello,

after installing today's candidate to Service Release, texts are not included in dwg/dxf files created with "Export Selected"

Rhino 5 64-bit, Windows 7 Pro

Views: 74

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jacek Godlewski on January 11, 2013 at 6:37am

Here is an example, master file in rhino and two exports to dwg

Attachments:
Permalink Reply by Pascal Golay on January 11, 2013 at 8:20am

Hi Jacek- the text is there, but scaled incorrectly- run SelText and set the text height in Properties to 25 as in the original file. I'll see if I can find out what is causing this...

-Pascal

pascal@mcneel.com

Permalink Reply by Jacek Godlewski on January 11, 2013 at 8:39am

Hi,

thank you for inquiry and reply. The text is indeed, very small (all texts are  0.2mm high).

In master file, they were of different height (from 15 to 25); setting them all to 25 will spoil the arrangement

Permalink Reply by Jacek Godlewski on January 21, 2013 at 12:11am

Today's silent update solved the problem, thank you

RSS

Translate

© 2013   Created by McNeel Admin.

Badges  |  Report an Issue  |  Terms of Service