Is is possible to create a panel system that has an intentional overlap?  This would be helpful to create shingles.  

Views: 472

Replies to This Discussion

Hi Jim,

Yes, this is possible with ptOrientToGrid command. This is how you can achieve a simple shingles system.

Let me know if this is what you are looking for.

Rajaa Issa

1- Create the module with base coroner points that overlap with the desired reference grid location

2- Create the Grid. It is easier if you set your module reference points to the same spacing you need in the system

3- Use ptOrientToGrid to populate the module.



© 2021   Created by McNeel Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service