"Hi all,
VSR-Shape Modeling has functions which produce a hole lot less points than rhino itself whith the intersection command for example.
So it is possible to have curves from surfaces with less points.
And its not my missing understanding of…"
André bauer's Discussions
Rotate Faces of Volume
Hi there,I was just missing a feature to rotate faces of a volume instead of moving edges which takes a lot of time. (and its not the pc's capacity)Great would be an option when rotating faces, to…Continue
Started Oct 9, 2012
Circle trough 2 points with defined radius?
1 Reply
Hi All,using rhino for more than 7 years now, I just missed an function I knew from Autocad:Drawing a circle trough 2 points with an defined radius.The tangency option does not help, because the…Continue
Started this discussion. Last reply by Pascal Golay Oct 4, 2012.
Showing properties and layer windows the same time
2 Replies
Hi,is it possible as in Rhino 4 to show the properties and layer windows the same time?I had them always below each other docked to the right side on the screen.If not this would be a great…Continue
Started this discussion. Last reply by André bauer Sep 9, 2012.
Extruding
5 Replies
Hi there,I am quite an experienced user in Rhino 4.0.In 5.0 I now want to extrude a edge from a surface with with 2 by 4 points and 1 by 3 degrees.The resulting surface has 22 points instead of 4.I…Continue
Started this discussion. Last reply by André bauer Feb 1.
André bauer's Page
Latest Activity
James Carruthers replied to André bauer's discussion Extruding
"Andre,
It sounds like you're just not very familiar with CAD.
If you want a section with the same number of points as your base surface, you use ExtractIsocurve, which actually takes a curve directly off the surface definition.
If you…"
André bauer replied to André bauer's discussion Extruding
"Hi there,
I'm still absolutely not satisfied with the situation.
Now there's a surface of 10x6 points, if I make a section curve through it, wether by sectioning with another flat plane or with the section curve command the curve will have…"
André bauer posted a discussion
Rotate Faces of Volume
Hi there,I was just missing a feature to rotate faces of a volume instead of moving edges which takes a lot of time. (and its not the pc's capacity)Great would be an option when rotating faces, to keep wether the profiles section lengths or keep the dimensions of the rotated surface.Any Idea?Best regards,AndréSee More
Pascal Golay replied to André bauer's discussion Circle trough 2 points with defined radius?
"Hi Andre- use Circle > 3Points and only place 2- you will then see a prompt for the radius.
-Pascal"
André bauer posted a discussion
Circle trough 2 points with defined radius?
Hi All,using rhino for more than 7 years now, I just missed an function I knew from Autocad:Drawing a circle trough 2 points with an defined radius.The tangency option does not help, because the circle will not meet the points, just the tangent help curves.Does anyone have an idea, script or whatever?Best,AndréSee More
Pascal Golay replied to André bauer's discussion Extruding
"Hi Andre- if the edge is a trimmed one, or joined to a trimmed edge on an adjacent surface, it may well have a more complex structure than the surface it is attached to. Untrimmed edges will inherit the surface structure but generally not trimmed…"
André bauer replied to André bauer's discussion Showing properties and layer windows the same time
"Hi Andrew,
thanks that helps.
Additionally there is to say that the toolbars must be unlocked.
André"
Andrew Heumann replied to André bauer's discussion Showing properties and layer windows the same time
"If you click and drag the tab at the top of the layer or properties palette you should be able to separate them so that they're both visible at the same time. "
André bauer posted a discussion
Showing properties and layer windows the same time
Hi,is it possible as in Rhino 4 to show the properties and layer windows the same time?I had them always below each other docked to the right side on the screen.If not this would be a great improvement, as switching costs time and screens are big enough todays.Best,AndréSee More
Mary Ann Fugier replied to André bauer's discussion Extruding
"Hi André,
My initial guess is that the isocurves are turned off on the surface whose edge you are extuding. it is likely far more complex than the shaded image leads us to beleive.
So to take the guessing out, please ExportSelected and…"
André bauer posted a discussion
Extruding
Hi there,I am quite an experienced user in Rhino 4.0.In 5.0 I now want to extrude a edge from a surface with with 2 by 4 points and 1 by 3 degrees.The resulting surface has 22 points instead of 4.I dont want to increase number of points this way.If I copy the curve before and rebuilt it to four points again, this does not happen.My tolerance is on standard with 0.001,before I used work with 0.1.But no difference in result wether 0.1 or 0.001 tolerance.Can someone help?Best,AndréSee More
André bauer replied to Dan Lewis's discussion Arrow Keys don't rotate view
"Hi All,
also my opinion. Please make rotation from parallel views easier.
Can you create a short cut for the 3D Mouse, so one can put the option on a button of the mouse?
Why does the 2D Button on the Space Explorer not work?
There are many cases…"
André bauer replied to André bauer's discussion Lost my Rhino 5.0 toolbars after installation of T-Splines 3.3
"Thanks Barry"
Barry Mair replied to André bauer's discussion Lost my Rhino 5.0 toolbars after installation of T-Splines 3.3
"Hi Andre.
There is a "ToolbarReset" command.
Restores toolbars to the default layout.
All toolbar (.rui) files are closed and Rhino must be restarted to complete the process. On restart, a new default toolbar file is unpacked from files…"
André bauer posted a discussion
Lost my Rhino 5.0 toolbars after installation of T-Splines 3.3
Hi All,after the installation of T-Splines 3.3 I lost my Rhino 5.0 toolbars completely.Could not find the rui or tb-files on my disk at all.Only the T-Splines bars are there.Can anyone help?Thanks in advanceAndréSee More
Profile Information
- Company, School, or Organization
- Bauer Yachtdesign
- I am a
- Commercial User
- Which operating system do you prefer?
- Windows
- Discipline/Occupation
- Marine Design, Rendering/Animation, Reverse Engineering
Comment Wall
- No comments yet!
© 2013 Created by McNeel Admin.
